Graphite grease for bearings?
Graphite grease is a heavy-duty lubricating grease and withstands very high pressures and temperatures. It is used in the lubrication of gears, bearings, ropes and metal cables.
A low viscosity oil or grease is optimal for light loads and high speeds. NLGI 1 or 2 grease is optimal for medium loads and medium speeds. For high loads, a grease with an EP2 additive may be required.
It is widely used in the automotive industry to lubricate bearings and mechanical parts of dynamo, alternator, starter motor, water pump and more. It offers good mechanical and chemical stability and protects against oxidation, corrosion, rust. It resists water well and is easily pumpable.
For example, the greases used to lubricate sliding systems, slides and roller or plain bearings should be sodium, for very slow flat bearings barium grease can be fine, for high pressure (EP) and ball bearings greases are needed. more specialized, and so on.
Boston molybdenum disulfide grease is a grease with exceptional lubricating, anti-seize and anti-wear properties. It resists humidity, oxidation, chemicals and high loads. It lubricates in the fluid phase up to a temperature of 140 degrees.
Lubricating greases of NLGI classes 1-4 are suitable for use in rolling bearings. The dropping point of a lubricating grease is the value of the temperature at which liquefaction of the grease occurs.
Copper grease, also called copper grease, is an anti-seize lubricating grease consisting of a mixture of solid lubricants and copper powder, finely dispersed in consistent grease. It is used to protect the threads of screws, nuts and bolts.
Teflon grease (or even silicone grease) are fine because they do not damage the plastic and rubber parts (or of the forks and oil seals).
Higher temperatures require greases with higher viscosity oils. Lower temperature applications require very low viscosity oils. Heavy loads require very high viscosity oils. High rotational speeds require very low viscosity oils.
Silicone grease is a silicone lubricant used to lubricate the contact between metal and rubber parts, which by their nature must be in contact with each other.
Persistent lubricant for locks, hinges, shutters, screw caps, technical, domestic and hobby uses. It hinders the corrosion of metals because it prevents contact with air and smog. Protects the rubber from imposing.
Teflon grease has the lowest known coefficient of friction, which is why it is used to lubricate industrial machinery capable of better resisting wear and rubbing of components.
It is therefore an excellent grease for components of a bicycle that work by friction, such as bearings.
Re: GREASE STEERING BEARINGS
The blue grease is excellent .. I usually use that of the skf and I have found myself well, then it holds up very well even at high temperatures so it is also good in those bearings where perhaps the high rotary motion causes balls / rollers to overheat a lot ..
Slick Kick is a special lithium-free grease for lubricating shock absorbers and forks.
To quickly lubricate the seals, hydraulic tailgate arms and door hinges, you need a silicone lubricant.
Vaseline, silicone, deer tallow & Co.
In the long run, this makes the seals porous and loses their protective properties. Suitable care products should be used Vaseline, Silicone. Ideal for good maintenance of deer tallow rubber.
An O-ring is a ring of elastomer (commonly called rubber), with a circular section used as a mechanical seal or seal. The o-rings are designed to be inserted into special housings and compressed during the assembly of two or more parts, thus creating a sealing gasket.
Zhuhaimei, YX - 2 Lubricating Grease for Plastic Gears / Mechanical Equipment / Printers (Color: White)
Lithium grease for power tools and high speed gears Hitachi Hikoki 714833.
Application of Äronix gear lubricating grease is used in sealed, sealed mechanical gears, for example: machine tools with slow running gears such as drills, drilling and hammers.
Copper paste is an ideal lubricant and release agent, for example for critical vehicle applications. Wherever heat or chemically aggressive liquids or gases occur, copper paste can permanently and effectively lubricate and separate components.
Finish Line ceramic grease represents Finish Line's most advanced technology for bearing lubrication. ... Guaranteed to maximize the performance and efficiency of bottom brackets, hub bearings and headset.