How do you read the water meters?
The dials with black numerators indicate cubic meters, while the decimals are red. To read the counter just write down the numbers with black indices. Reading is done clockwise, starting from the bottom left and proceeding to the right. Only the hands of the black watches are to be read.
How do you read the water meter with three hands?
You will therefore have to start with x1000 m3 which indicates thousands, then x100 m3 which indicates hundreds, then x10 m3 which indicates tens and then x1 m3 which indicates units. Reading example: hand x1 is on number 4, hand x10 on 5, x100 on 2 and x1000 on 3, the final reading will be 3254.
What do the red numbers on the water meter mean?
Any black roller therefore indicates an integer and not a decimal number, while the red hands indicate the submultiples of the cubic meter. By performing the simple transformation from cubic meter, the reading in liters can be obtained (0,001 cubic meter = 1 liter).
How are the new water meters?
The new water meters are of the direct reading type, they indicate the volume with number rollers and with hands, where the rollers with black numbers indicate a whole number useful for self-reading, while the red hands indicate the decimals as submultiples of the meter. cube, you can get the reading in liters (...
How to check if the water meter is working well?
Generally, the application for instrument verification can be requested through several channels.- You can ask for verification of the water meter:
- by calling the customer service toll-free number.
- by going to a branch in the area.
- by submitting the written request: by post. by fax. by email.
The water meter
Find 35 related questions
How much does it cost to check the water meter?
The cost relating to the technical charge is around 50 euros or more (therefore ask your supplier company), and is charged to the next bill if the meter is functioning correctly.
How much do 200 cubic meters of water cost?
For a consumption ranging from 90 to 200 cubic meters, the price is € 3,61. You must also add an annual fixed cost, always referring to a standard user, the fee is approximately € 56,00. Let's take a practical example to better understand.
Where should the water meter be placed?
The meter will normally be placed inside the houses in a position agreed with the Manager. If the meter is to be placed outside the building, it will be placed on the property boundary in a special well, or niche, adequately protected from frost.
How to read cubic meters of water?
The dials with black numerators indicate cubic meters, while the decimals are red. To read the counter just write down the numbers with black indices. Reading is done clockwise, starting from the bottom left and proceeding to the right. Only the hands of the black watches are to be read.
How do you read the meter?
The electronic counter is equipped with a display on the front. To the right of the display you will find the read button. By pressing the Enel meter reading button several times you can read all the useful information relating to your consumption.
How to Span the water meter?
If the tube is fixed with the meter is not too hard, it is possible that to beat (or very accurately by the meter itself) of water droplets slip the glass; You can apply a long-term method and drill a small hole in the glass thin drill.
How to do the Abbanoa meter reading?
Communicate your self-reading to receive billing on your actual consumption....
If you want to communicate the self-reading of your meter:
- register at the Online Sportello.
- access the "requests" section
- click on "Self-reading"
- Check that the serial number indicated is correct.
- Enter the reading found.
- click "send"
How do you read the gas in the new meters?
While in the old models the meter reading took place by communicating only the numbers identified on a black background and reading the figures to the left of the comma, in the new generation meters it is necessary to press some keys on the front to access the consumption data on the display, which is normally off. .
How to read water meter red hands?
At the top right of the gray tab you can see the deciliter hands. Type of meter with direct reading, 5 digits. The 4 red hands indicate, from left to right, deciliters, liters, decaliters and hectoliters. the cubic meters are indicated in the 5 black boxes.
How many cubic meters of water per month?
From a tap open to the maximum, 8 liters of water come out per minute and 480 liters in an hour, that is almost half a cubic meter of water. A faucet that leaks 30 drops of water per minute wastes 200 liters in a month and 24 cubic meters of water in a year.
How to calculate water consumption from the meter?
Lift the cap on its hinge to expose the dial. Measure your home's water consumption. On the front of the meter you will see a large dial with a series of numbers: these numbers indicate the amount of water consumed in your home since the last time the meter was reset.
How to read direct reading water meter?
To carry out the self-reading of a direct reading meter, it will simply be necessary to signal the whole numbers from left to right. If the last digit of the reel is not aligned, the lowest digit must be marked. In the example below, the reading is 9731m3.
How much does a cubic meter of water cost?
It depends on the consumption and the type of user.
For a standard user (resident domestic and using aqueduct, sewerage and purification), up to 30 cubic meters of consumption, water costs € 1,37 per cubic meter; from 30 to 90, € 2,88; from 90 to 200, 3,61 € and so on.
How much does it cost to install a water meter?
Supply and installation of the individual multi-jet water meter: from € 48,00 to € 492,00. Supply and installation of the individual water meter for wells or irrigation systems: from € 57,00 to € 560,00. Installation of the water point: from € 75,00 to € 150,00.
Who pays for the installation of the water meter?
With regard to the replacement of the water meter, it will be up to the owner of the property to bear the cost, unless the asset to be replaced is not tampered with by the tenant. In the latter case, it will be the tenant's responsibility to replace the faulty meter with a new one.
How much does 1000 liters of water cost?
The water supplied from the tap, therefore, is confirmed to be extremely convenient and truly economical, because 1000 liters cost about 1,86 euros (for a nucleus of three people, with an average consumption of 150 cubic meters per year), compared to a average cost per cubic meter of bottled water ranging from 150 up to 400 euros ...
How much do 120 cubic meters of water cost?
The average annual water consumption for a family of two is 120 cubic meters for a cost of 130 euros (1,08 euros per cubic meter). Value that grows to 228 euros for a group of four people who on average consumes 180 cubic meters of water (1,26 euros per cubic meter).
How much does water cost per year?
This is certified by the Price and Tariff Observatory of Cittadinanzattiva which found a 2,6% increase in the average cost of bills between 2019 and 2020. Therefore, the average cost of a typical family's water bill is around 448 euros per year.
How to remove the air from the water meter?
Once all the water has stopped flowing through the water system, turn off the tap at the lowest point in the house, opening all other taps. To remove the air from the water pipes, run the water through these taps for a few minutes.
