How many volumes of hydrogen peroxide to disinfect?
Properties and uses of hydrogen peroxide. 3% hydrogen peroxide (10 volumes) is mainly a good antiseptic and is the only concentration that, used in a conscious way, can be useful for personal care. Let's see how!
Below is a list with the two concentration measurements in comparison: Hydrogen peroxide 3% corresponds to 10 volumes. 3,6% hydrogen peroxide corresponds to 12 volumes. 10% hydrogen peroxide corresponds to 34 volumes.
Hydrogen peroxide 10 volume: What it is and what it is used for
Hydrogen peroxide 10 volume is for external use only and for a disinfectant action thanks to the oxidizing effect of hydrogen peroxide. It also removes any bacteria on the wound. It is especially effective in the case of: Wounds.
To prepare the ecological alternative to traditional bleach, just dilute the hydrogen peroxide to 130 volumes in water in the proportion of 1: 5 and add citric acid to stabilize the diluted solution.
Adverse Effects. When used as a disinfectant for skin wounds, hydrogen peroxide could, in some rare situations, cause redness, stinging and / or irritation, all at the site where it is applied.
Hydrogen peroxide is mostly used to prevent infections of small wounds, burns, cuts, acne, and skin abrasions. To do this, simply apply the product to the area to be treated, more than once a day, until the wound has healed.
To dress a wound without disinfectant, you can use cold soapy water to perform a first cleaning. Remove any traces of earth, dust, fragments or thorns and then rinse the wound under running water using a non-violent water jet (low pressure).
130-volume hydrogen peroxide can also be used to remove mold from walls. To do this, always wear gloves and goggles, get a rag to moisten with normal water. Wet with a few drops of hydrogen peroxide and pass it on the area affected by mold.
Aqueous solution of 130 volumes, colorless and strongly oxidizing. Also known as hydrogen peroxide, it is ideal for lightening and whitening wood. ... The 130-volume hydrogen peroxide stabilizes with strong acid, it must be activated at the time of use with an alkaline substance, for example pure ammonia.
HOW TO USE:
- 200 g hydrogen peroxide 130 vol.
- two tablespoons of eco-label dish detergent.
- two spoonfuls of citric acid.
- fill up to 1 liter of water.
The hydrogen peroxide that is commonly found on the market is a solution at 3% by weight equal to 10 volumes, i.e. the value indicates that a liter of hydrogen peroxide at the same concentration is capable of releasing 10 liters of oxygen.
- Make a peroxide solution. ...
- Apply the solution to your hair, whether you spray it all over your head or use a cotton ball to apply the solution only to the clumps you want to specifically clarify. ...
- Let it rest. ...
Hydrogen peroxide, in addition to exerting a disinfectant action - thanks to the natural "effervescence" that develops following contact with the skin - can also be useful for removing any foreign bodies or dirt particles that have ended up in depth and normal cleansing with water she was unable to ...
- EUCLORINA DISINFECTANT FOR EXTERNAL USE SINGLE-DOSE 10 BAGS. ...
- IODINE DISINFECTANT ALCOHOLIC SOLUTION 25 ML. ...
- CETILSAN DISINFECTANT SKIN SOLUTION 200 ML. ...
- AMUKINE MED DISINFECTANT SKIN SOLUTION 250 ML. ...
- BIALCOL SKIN DISINFECTANT 300 ML. ...
- BETADINE DISINFECTANT SKIN SOLUTION 125 ML.
Hydrogen peroxide is easily found on the market in pharmacies or in any supermarket. The packages that are more easily found are those at a concentration that varies between 3% and 6%.
- Cloth whitener in the soaking water or together with the detergent in the washing machine.
- Disinfectant for floors and sanitary ware especially when used together with vinegar. ...
- Disinfection of surfaces and cabinets in the kitchen.
Compare 2 offers for Oxygenated Water 130 Volumes starting from € 31,99
Amazon.co.uk: hydrogen peroxide 130 volumes.
(* Note: diluting one part of hydrogen peroxide [3% 10 vol.] With two parts of water means obtaining a concentration of 1% of disinfectant.
If you have 130-volume hydrogen peroxide at home, you can also use this product to remove stains from the walls: the procedure involves diluting 2 glasses of hydrogen peroxide in 1 liter of water and using this mixture to directly remove mold from the walls, rubbing with a ...
In this case it is necessary to clean the entire surface from any residual dust or other stains. Use 130-volume hydrogen peroxide. This solution is often used as it does not damage the wood fibers and leaves the surface with a rather uniform color.
Let's now see an example: 1 liter of hydrogen peroxide at 10 volumes means that this liter of solution is capable of generating 10 liters of oxygen (1 * 10). 10 / 22,4 = 0,446 moles of oxygen.
Just add a coffee tablespoon of coarse salt to half a glass of water: this saline solution can be used to rinse or soak a gauze and use it to clean the wound and, in the case of more serious infections, it is can leave for a few minutes.
Once the lesion has been cleaned, it may be helpful to apply a hyaluronic acid-based cream or gel locally. In fact, hyaluronic acid helps to maintain the correct degree of hydration of the skin, thus helping the re-epithelialization of the skin tissue. Cover the wound.
Warm salt is placed in a woolen cloth, even a sock is fine, and the compress is applied to the painful area. Taking care not to burn yourself, it should be kept for five minutes. The analgesic effect is immediate. The salt can be reused three more times and the pack can be applied every three hours.