How much does the establishment cost?
The cost of civil plaster for interiors is about € 8 per 25 kg, about € 4 per square meter. As for the cost of shaving or stabilization per square meter, it is about € 5 - € 6 per square meter.
The material has a low price which is around 3-5 euros per bag on average and, since its application does not exceed a few millimeters in thickness, approximately 8 square meters can be covered with a single bag.
€ 4,64 (VAT inc.) THE PRICE OF THE PRODUCT IS INCLUDING VAT.
Plastering typically costs between 10 and 50 euros per square meter including smoothing, so you can expect to pay 500 to 10.000 euros depending on the size, complexity of the job and the type of plaster to be used.
STABILITURA più: it must be applied with a metal trowel on the base plaster, previously moistened. Then work the product with a sponge trowel. The most applied STABILITURA finish can be painted with any wall paint (check the degree of breathability).
The stabilization is often based on slaked lime and is a real mortar. Its main function is to level and regularize the plasters that form the foundation of a specific job.
Using the Sponge Smashing Trowel:
Dampen the plaster with water, spraying it with a brush and pass the trowel with the widest possible circular motion. In fact, the wide movement avoids acting on a point for too long and creating hollows.
The cost of traditional plaster per square meter varies between € 12 - € 19 per square meter including smoothing. The price varies mainly on the basis of the binder used: Lime: plaster based on hydrated lime or powder.
Prices per m² The plastering of the walls can cost between 8 and 50 € / m² (depending on the plaster), although it must be taken into account that only the labor can be between 10 and 30 € / m².
The material costs are also in a relatively wide range between EUR 1 per m² and EUR 7 per m², depending on whether only a finishing plaster or a complete gypsum structure is required. The total costs for plastering can therefore range from approximately EUR 12 per m² to EUR 45 per m².
Premixed cement is usually sold in bags of 5, 15, 25 and 50 kg, with 25 kg bags averaging 0,015 per cubic meter.
Premixed bag kg 25 € 1,85 | Outlet della Mattonella Salerno sales.
Consumption: approximately 15 kg / m² per cm of thickness. Minimum application thickness: 3 mm.
70-75 bags are required to pack 1 m3 of dough with the above consistency.
Consumption: approx 16 kg per sq m - approx 16 ql per 1 mXNUMX of mortar.
Lime putty is used to smooth the walls, which is a compound obtained from the fusion of water and calcium hydrate, with a pasty consistency but at the same time also soft and elastic, perfect to work with and to apply to the walls.
A team of 2-3 people with premixed plaster (by machine) manages to do about 100 square meters per day of plaster (with relative bands) and considers another 100 square meters the next day for finishing (smoothing, curling, etc ...)
Cost of labor for smoothing internal walls (good conditions): from € 4,00 to € 10,00 per square meter. Cost of labor for smoothing internal walls (bad conditions): from € 5,00 to € 14,00 per square meter. Intervention of shaving of the internal walls with removal and anti-mold treatment: from € 6,50 to € 21,50 per square meter.
External plaster cost and price per square meter
The cost of renovating the facade varies from € 25 to € 30 per square meter. The redone plaster has a thickness of about 3 cm. The materials for the plaster are cement lime mortars.
Plastering the wall
Time required: 2 hours. The plaster is applied to the areas of the wall between two vertical bands. The mortar is thrown with a decisive blow against the wall.
Installation of colored silicate plaster for exteriors: from € 4,75 to € 14,00 per square meter. Installation of colored siloxane plaster for exteriors: from € 5,50 to € 16,00 per square meter. Installation of colored lime-based plaster for exteriors: from € 4,00 to € 12,00 per square meter.
The trowel is mainly used to smooth the walls until they have dried, thus becoming hard and being no longer treatable. It often becomes a support tool for the mortar to be applied on the wall to be smoothed.
The sponge trowel is the tool used in construction to make the surface of a wall smooth and uniform. It is a special type of trowel that allows the application of the stabilization, that is the last layer of plaster with fine-grained mortar.
Pre-moisten the dry base plasters. Add 30-34% of clean water and mix in a cement mixer or, for small quantities, by hand or with a mechanical mixer. The mixing time must not exceed 3 minutes and the mixed material must be used within 2 hours.